Setting range of the output voltage (USet)
Nominal output current (IN)
Current consumption
0.6 A (charging process)
20.6 A (max.)
approx. 0.1 A
Reverse polarity protection
Variable connect threshold
(U<sub>IN</sub> - 1 V)/0.1 s
Protective circuit
Transient surge protection; Suppressor diode, 35 V DC
Nominal output voltage
24 V DC
24 V DC (depending on the input voltage)
Setting range of the output voltage (U<sub>Set</sub>)
Nominal output current (I<sub>N</sub>)
Feedback voltage resistance
Protection against overvoltage at the output (OVP)
Residual ripple
< 100 mV<sub>PP</sub> (buffer mode)
Peak switching voltages nominal load
< 100 mV<sub>PP</sub> (20 MHz)
Power dissipation
2.5 W (ready at 27 A)
9.8 W (buffer mode at 27 A)
Connection in parallel
yes, for increasing the buffer time and for redundancy
Maximum switching voltage
Conductor cross-section, rigid min.
Conductor cross-section, rigid max.
Conductor cross-section flexible min.
Conductor cross-section flexible max.
Conductor cross-section AWG min.
Conductor cross-section AWG max.
Types of signaling
Active switching output
LED
Operating voltage display
Note on status display
Buffer module is loaded: LED ON