Inrush current integral (I2t)
Nominal input voltage range
2x / 3x 400 V AC ... 500 V AC
Input voltage range
2x 360 V AC ... 575 V AC (for 2-phase operation)
3x 320 V AC ... 575 V AC (for 3-phase operation)
Setting range of the output voltage (USet)
22.5 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Input voltage range AC
2x 360 V AC ... 575 V AC (for 2-phase operation)
3x 320 V AC ... 575 V AC (for 3-phase operation)
Nominal output current (IN)
5 A (U<sub>OUT</sub> = 24 V DC)
Voltage type of supply voltage
Inrush current integral (I<sup>2</sup>t)
Mains buffering time
> 20 ms (3x 400 V AC)
> 30 ms (3x 480 V AC)
Current consumption
2x 0.5 A (500 V AC)
2x 0.65 A (400 V AC)
3x 0.25 A (500 V AC)
3x 0.3 A (400 V AC)
Nominal power consumption
Protective circuit
Transient surge protection; Varistor
Recommended breaker for input protection
6 A ... 16 A (Characteristics B, C, D, K)
Efficiency
89 % (at 400 V AC and nominal values)
Setting range of the output voltage (U<sub>Set</sub>)
22.5 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (I<sub>N</sub>)
5 A (U<sub>OUT</sub> = 24 V DC)
Derating
55 °C ... 70 °C (2.5 %/K)
Feedback voltage resistance
Protection against overvoltage at the output (OVP)
Active current limitation
Approx 6 A (in the event of a short-circuit)
Control deviation
< 0.1 % (change in input voltage ±10 %)
< 1 % (change in load, static 10 % ... 90 %)
< 2 % (change in load, dynamic 10 % ... 90 %)
Peak switching voltages nominal load
Maximum no-load power dissipation
Power loss nominal load max.
Rise time
< 2 ms (U<sub>OUT</sub> (10 % ... 90 %))
Connection in parallel
yes, for redundancy and increased capacity
Conductor cross-section, rigid min.
Conductor cross-section, rigid max.
Conductor cross-section flexible min.
Conductor cross-section flexible max.
Conductor cross-section AWG min.
Conductor cross-section AWG max.