Nominal input voltage UIN
Nominal input current at UIN
Note on dimensions
Specfications with connectors
CCCex note
Use in potentially explosive areas is not permitted in China.
Connection method
Inline connector
Inline data jumper
RJ45 jack
Spring-cage connection
Note on the connection method
Auto negotiation and autocrossing
Permissible conductor cross-section
0.14 mm² ... 0.22 mm² (twisted pair)
Transmission speed
10/100 Mbps (half or full duplex (automatic detection))
500 kbps / 2 Mbps (automatic detection, no combined system)
Transmission physics
Ethernet in RJ45 twisted pair
Max. number of local bus devices
61 (The on-board I/Os are two devices)
Amount of process data (Input data)
Amount of process data (Output data)
Number of supported devices
Number of local bus devices that can be connected
max. 61 (The on-board I/Os are two devices)
Number of devices with parameter channel
Input voltage range "0" signal
Input voltage range "1" signal
Nominal input voltage U<sub>IN</sub>
Nominal input current at U<sub>IN</sub>
Typical input current per channel
Delay at signal change from 0 to 1
Delay at signal change from 1 to 0
Protective circuit
Reverse polarity protection; Suppressor diode
Short-circuit and overload protection; Free running circuit
Short-circuit protection of the analog supply; electronic
Short-circuit protection of the communications power; electronic
Output voltage
24 V DC -1 V (At nominal current)
Max. current carrying capacity per output
Maximum output current per module
Output current when switched off
max. 10 µA (When not loaded, a voltage can be measured even at an output that is not set.)