Connection method
Inline connector
Inline data jumper
Spring-cage connection
Supply voltage
24 V DC (via voltage jumper)
7.5 V DC (via voltage jumper)
typ. 14 V DC (Bus voltage)
Output current with short-circuit
Current carrying capacity
max. 128 mA (Bus load; observe derating when using DALI extension terminals.)
Type of protection
Bus protected up to 250 V AC, maximum
Number of local bus devices that can be connected
3 (DALI extension terminals)
Required configuration data
Scope of supply
including Inline connectors and marking fields
Special properties
integrated DALI power supply unit
safe electrical isolation
Overvoltage category
II (IEC 60664-1, EN 60664-1)
Pollution degree
2 (IEC 60664-1, EN 60664-1)
Maximum power dissipation for nominal condition
Current draw
max. 128 mA
max. 38 mA
max. 441 mA
Supply voltage range
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG
Ambient temperature (operation)
-25 °C ... 60 °C (Observe derating when using DALI extension terminals.)
Air pressure (operation)
80 kPa ... 106 kPa (up to 2000 m above sea level)
Air pressure (storage/transport)
70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)
Permissible humidity (operation)
10 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)
10 % ... 95 % (non-condensing)
Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-6