Input voltage range in reference to UN
Mechanical service life
approx. 3x 10<sup>7</sup> cycles
Typical input current at UN
Insulation
Basic insulation
Reinforced insulation
Rated surge voltage
4 kV (1.2/50 μs)
6 kV (1.2/50 μs)
Suitable I/O card
TDOB01 (non-redundant)
TDOB11 (redundant)
Nominal input voltage U<sub>N</sub>
Input voltage range in reference to U<sub>N</sub>
Typical input current at U<sub>N</sub>
Maximum switching voltage
Minimum switching voltage
Limiting continuous current
Interrupting rating (ohmic load) max.
48 W (60 V DC)
58 W (48 V DC)
91 W (24 V DC)
Connection method
D-SUB pin strip
Flat-ribbon cable connector in acc. with IEC 60603-13
Spring-cage connection
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG
Degree of protection (Installation location)
≥ IP54 (Installation location)
Ambient temperature (operation)
Ambient temperature (storage/transport)
Assembly note
in rows with zero spacing
Notes on operation
Do not connect adjacent channels to SELV/ PELV and voltages dangerous to the touch.