EMC note
EMC: class A product, see manufacturer's declaration in the download area
Configuration
App
DIP switches
Software
Electrical isolation between input and output
Step response (0–99%)
140 ms (15 Hz sample rate)
25 ms (240 Hz sample rate, can only be set via software)
45 ms (60 Hz sample rate)
Maximum temperature coefficient
Temperature coefficient, typical
Maximum transmission error
Standards/regulations
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-6-4
GB/T 3836.1
GB/T 3836.3
IEC/EN 61010-1
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715)
Typical current consumption
32 mA (24 V DC)
63 mA (12 V DC)
Power consumption (I output)
≤ 1 W (at I<sub>OUT</sub> = 20 mA, 9.6 V DC, 600 Ω load)
Configurable/programmable
Voltage input signal
0 V ... 10 V (via DIP switch)
0 V ... 12 V (can be set via software)
0 V ... 5 V (via DIP switch)
1 V ... 5 V (via DIP switch)
10 V ... 0 V (via DIP switch)
10 V ... 2 V (via DIP switch)
2 V ... 10 V (via DIP switch)
5 V ... 0 V (via DIP switch)
5 V ... 1 V (via DIP switch)
Max. voltage input signal
Current input signal
0 mA ... 10 mA (via DIP switch)
0 mA ... 20 mA (via DIP switch)
0 mA ... 24 mA (can be set via software)
10 mA ... 0 mA (via DIP switch)
10 mA ... 2 mA (via DIP switch)
2 mA ... 10 mA (via DIP switch)
20 mA ... 0 mA (via DIP switch)
20 mA ... 4 mA (via DIP switch)
4 mA ... 20 mA (via DIP switch)
Max. current input signal
Input resistance of voltage input
Input resistance current input
approx. 50 Ω (+0.7 V for test diode)
Minimum switching voltage
Maximum switching voltage
Voltage output signal
0 V ... 10 V (via DIP switch)
0 V ... 10.5 V (can be set via software)
0 V ... 5 V (via DIP switch)
1 V ... 5 V (via DIP switch)
2 V ... 10 V (via DIP switch)
Max. voltage output signal
Current output signal
0 mA ... 10 mA (via DIP switch)
0 mA ... 20 mA (via DIP switch)
0 mA ... 21 mA (can be set via software)
2 mA ... 10 mA (via DIP switch)
4 mA ... 20 mA (via DIP switch)
Max. current output signal
Load/output load voltage output
Load/output load current output
Ripple
< 20 mV<sub>PP</sub> (at 600 Ω)
Connection method
Micro USB type B
Push-in connection
Conductor cross-section rigid
0.14 mm² ... 2.5 mm² (without ferrule)
0.2 mm² ... 2.5 mm² (with ferrule)
Conductor cross-section flexible
Conductor cross-section AWG
Status display
Green LED (supply voltage)
Yellow LED (switching output)