EMC note
EMC: class A product, see manufacturer's declaration in the download area
Configuration
App
DIP switches
Software
Electrical isolation between input and output
Step response (0–99%)
140 ms (can be set via software)
Maximum temperature coefficient
Maximum transmission error
Standards/regulations
EN 61000-6-4
GB/T 3836.1
GB/T 3836.3
GB/T 3836.4
GB/T 3836.8
IEC/EN 61010-1
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715)
Typical current consumption
20 mA (24 V DC)
40 mA (12 V DC)
Power consumption (I output)
Configurable/programmable
Voltage input signal
0 V ... 10 V (via DIP switch)
0 V ... 12 V (can be set via software)
Max. voltage input signal
Current input signal
0 mA ... 20 mA (via DIP switch)
0 mA ... 24 mA (can be set via software)
Max. current input signal
Input resistance of voltage input
Input resistance current input
50 Ω (+0.7 V for test diode)
Specification of the switching point
Can be set via software or in steps via DIP switches
Contact material
AgSnO<sub>2</sub>, hard gold-plated
Maximum switching voltage
240 V AC (UL)
250 V AC
30 V DC
Limiting continuous current
Max. switching current
4 A DC (30 V DC)
6 A AC (250 V AC)
Setting range of the response delay
0 s ... 10 s (can be set freely via software)
Internal hysteresis
can be set freely via software
Connection method
Micro USB type B
Push-in connection
Conductor cross-section rigid
0.14 mm² ... 2.5 mm² (without ferrule)
0.2 mm² ... 2.5 mm² (with ferrule)
Conductor cross-section flexible
Conductor cross-section AWG
Status display
Green LED (supply voltage)
Yellow LED (switching output)