EMC note
EMC: class A product, see manufacturer's declaration in the download area
Configuration
App
DIP switches
Software
Electrical isolation between input and output
Step response (0–99%)
200 ms (2-conductor)
500 ms (3-conductor)
500 ms (4-conductor)
Maximum temperature coefficient
Transmission error resistance-type sensor
Transmission error resistance thermometer
0.1 % * 350 K / set measuring range; 0.1 % > 350 K (Pt/Ni)
0.3 % * 200 K / set measuring range; 0.3 % > 200 K (Cu)
Standards/regulations
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-6-4
GB/T 3836.1
GB/T 3836.3
IEC/EN 61010-1
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715)
Typical current consumption
32 mA (24 V DC)
63 mA (12 V DC)
Power consumption
≤ 850 mW (at I<sub>OUT</sub> = 20 mA, 9.6 V DC, 600 Ω load)
Configurable/programmable
Sensor types (RTD) that can be used
Temperature measuring range
-200 °C ... 850 °C (Range depends on sensor type, range can be set freely via software or in increments from -150°C to 850°C via DIP switches)
≥ 20 K
Max. permissible overall conductor resistance
≤ 25 Ω (Per line, RTD in 3- or 4-conductor technology)
≤ 50 Ω (adjustable, RTD in 2-conductor technology)
Linear resistance measuring range
0 Ω ... 4000 Ω (Minimum measuring span: 10% of the selected measuring range)
Voltage output signal
0 V ... 10 V (via DIP switch)
0 V ... 10.5 V (can be set via software)
0 V ... 5 V (via DIP switch)
1 V ... 5 V (via DIP switch)
10 V ... 0 V (via DIP switch)
Max. voltage output signal
Current output signal
0 mA ... 20 mA (via DIP switch)
0 mA ... 21 mA (can be set via software)
20 mA ... 0 mA (via DIP switch)
20 mA ... 4 mA (via DIP switch)
4 mA ... 20 mA (via DIP switch)
Max. current output signal
Load/output load voltage output
Load/output load current output
Ripple
< 10 mV<sub>rms</sub>
< 10 mV<sub>rms</sub> (at 600 Ω)
Resolution, outputs (voltage)
Resolution, outputs (current)
Behavior in the event of a sensor error
Connection method
Micro USB type B
Screw connection
Conductor cross-section rigid
0.14 mm² ... 2.5 mm² (without ferrule)
0.2 mm² ... 1.5 mm² (with ferrule)
Conductor cross-section flexible
Conductor cross-section AWG
Status display
Green LED (supply voltage)