EMC note
EMC: class A product, see manufacturer's declaration in the download area
Product type
Frequency value transformer
Configuration
App
DIP switches
Software
Electrical isolation between input and output
Maximum temperature coefficient
Maximum transmission error
0.1 % (Frequency (Hz/rpm))
1 % (PWM signal)
Standards/regulations
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-6-4
GB/T 3836.1
GB/T 3836.3
IEC/EN 61010-1
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715)
Typical current consumption
32 mA (24 V DC)
63 mA (12 V DC)
Power consumption (I output)
≤ 1 W (at I<sub>OUT</sub> = 20 mA, 9.6 V DC, 600 Ω load)
Available input sources
Floating contact (dry contact)
Frequency generator
HTL encoders
Incremental encoder (speed only)
NAMUR initiators
NPN/PNP transistor outputs
S0 signal
TTL rotary transducer
Max. voltage input signal
Frequency measuring range
PWM (range)
0.002 Hz ... 60 Hz (Duty cycle 2 ... 98 %)
300 Hz ... 600 Hz (Duty cycle: 10 ... 90 %)
60 Hz ... 300 Hz (Duty cycle: 5 ... 95 %)
600 Hz ... 1000 Hz (Duty cycle 20 ... 80 %)
Minimum switching voltage
Maximum switching voltage
Configurable/programmable
Voltage output signal
0 V ... 10 V (via DIP switch)
0 V ... 10.5 V (can be set via software)
0 V ... 5 V (via DIP switch)
1 V ... 5 V (via DIP switch)
2 V ... 10 V (via DIP switch)
Max. voltage output signal
Current output signal
0 mA ... 10 mA (via DIP switch)
0 mA ... 20 mA (via DIP switch)
0 mA ... 21 mA (can be set via software)
2 mA ... 10 mA (via DIP switch)
4 mA ... 20 mA (via DIP switch)
Max. current output signal
Load/output load voltage output
Load/output load current output
Ripple
< 20 mV<sub>PP</sub> (600 Ω)
Conductor cross-section rigid
0.14 mm² ... 2.5 mm² (without ferrule)
0.2 mm² ... 2.5 mm² (with ferrule)
Conductor cross-section flexible
Conductor cross-section AWG
Status display
Green LED (supply voltage)
Yellow LED (switching output)