Input voltage range in reference to UN
Application
100 kHz input optocoupler
Switching threshold "0" signal in reference to UN
Switching threshold "1" signal in reference to UN
Typical input current at UN
Date of last data management
Maximum power dissipation for nominal condition
Test voltage (Input/output)
2.5 kV<sub>rms</sub> (50 Hz, 1 min., input/output)
Nominal input voltage U<sub>N</sub>
Input voltage range in reference to U<sub>N</sub>
Switching threshold "0" signal in reference to U<sub>N</sub>
Switching threshold "1" signal in reference to U<sub>N</sub>
Typical input current at U<sub>N</sub>
Operating voltage display
Protective circuit
Reverse polarity protection
Surge protection
Limiting continuous current
Voltage drop at max. limiting continuous current
Output circuit
3-conductor push-pull, ground referenced
Conductor cross-section rigid
Conductor cross-section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross-section AWG
Tightening torque
0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing))
Ambient temperature (operation)