Rated control circuit supply voltage US
Voltage range with reference to US
Rated control supply current IS
13 mA (Input low, output low)
19 mA (Input high, output high)
Rated actuating voltage UC
Rated actuating current IC
"0" signal switching threshold in reference to UC
"1" signal switching threshold in reference to UC
Date of last data management
Maximum power dissipation for nominal condition
Test voltage (Input/output)
2.5 kV<sub>rms</sub> (50 Hz, 1 min., input/output)
Rated control circuit supply voltage U<sub>S</sub>
Voltage range with reference to U<sub>S</sub>
Rated control supply current I<sub>S</sub>
13 mA (Input low, output low)
19 mA (Input high, output high)
Rated actuating voltage U<sub>C</sub>
Rated actuating current I<sub>C</sub>
"0" signal switching threshold in reference to U<sub>C</sub>
"1" signal switching threshold in reference to U<sub>C</sub>
Operating voltage display
Protective circuit
Free running
Reverse polarity protection
Surge protection
Limiting continuous current
Voltage drop at max. limiting continuous current
Output circuit
3-conductor, ground-referenced
Conductor cross-section rigid
Conductor cross-section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross-section AWG
Tightening torque
0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing))
Ambient temperature (operation)