Input voltage range in reference to UN
Typical input current at UN
Mechanical service life
approx. 10<sup>7</sup> cycles
Date of last data management
Maximum power dissipation for nominal condition
Test voltage (Winding/contact)
2.5 kV<sub>rms</sub> (50 Hz, 1 min., winding/contact)
Test voltage (Contact/contact)
2.5 kV<sub>rms</sub> (50 Hz, 1 min., contact/contact)
Nominal input voltage U<sub>N</sub>
Input voltage range
195.5 V AC ... 253 V AC (20 °C)
Input voltage range in reference to U<sub>N</sub>
Typical input current at U<sub>N</sub>
Typical release time range
Operating voltage display
Maximum switching voltage
Minimum switching voltage
Limiting continuous current
Maximum inrush current
50 A (20 ms, N/O contacts)
Interrupting rating (ohmic load) max.
108 W (60 V DC)
124 W (48 V DC)
216 W (24 V DC)
2250 VA (250 V AC)
4000 VA (440 V AC)
52 W (110 V DC)
70 W (220 V DC)
Motor load according to UL 508
1/2 HP, 240 V AC (single-phase AC motor)
1/2 HP, 240 V AC (three-phase induction motor)
1/3 HP, 120 V AC (single-phase AC motor)
Utilization category CB Scheme (IEC 60947-5-1)
AC15, 1.5 A/240 V (N/O contact)
DC13, 2 A/240 V (N/O contact)
Conductor cross-section rigid
0.14 mm² ... 1.5 mm²
0.14 mm² ... 2.5 mm²
Conductor cross-section flexible
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)
0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
0.14 mm² ... 2.5 mm²
0.14 mm² ... 2.5 mm² (Ferrule with plastic sleeve)
Conductor cross-section AWG
26 ... 14 (flexible)
26 ... 14 (solid)
26 ... 16 (flexible)
26 ... 16 (solid)