Notes on operation
FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21)
Input voltage range in reference to UN
Typical input current at UN
Insulation
Basic insulation between the changeover contacts
Safe isolation between input and output
Date of last data management
Maximum power dissipation for nominal condition
Test voltage (Winding/contact)
4 kVrms (50 Hz, 1 min., winding/contact)
Rated surge voltage
4 kV (between the changeover contacts)
6 kV (Input/output)
Input voltage range
96 V AC ... 138 V AC (20 °C)
Input voltage range in reference to UN
Typical input current at UN
Typical release time range
Operating voltage display
Maximum switching voltage
Minimum switching voltage
Limiting continuous current
Maximum inrush current
25 A (20 ms, N/O contacts)
Interrupting rating (ohmic load) max.
240 W (24 V DC)
2500 VA (250 V AC)
48 W (60 V DC)
50 W (110 V DC)
58 W (48 V DC)
80 W (220 V DC)
Utilization category CB Scheme (IEC 60947-5-1)
AC15, 1.5 A/240 V (N/O contact)
AC15, 3 A/250 V (N/C contact)
DC13, 0.2 A/250 V (N/O contact)
DC13, 2 A/24 V (N/C contact)
Conductor cross-section rigid
Conductor cross-section flexible
0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)
0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
Conductor cross-section AWG
26 ... 16 (flexible)
26 ... 16 (solid)