Input voltage range in reference to UN
Typical input current at UN
Date of last data management
Maximum power dissipation for nominal condition
Test voltage (Winding/contact)
4 kVrms (50 Hz, 1 min., winding/contact)
Input voltage range
9.6 V DC ... 18 V DC (20 °C)
Input voltage range in reference to UN
Typical input current at UN
Operating voltage display
Contact material
AgSnO
AgSnO, hard gold-plated
Maximum switching voltage
250 V AC/DC
30 V AC
36 V DC
Minimum switching voltage
100 mV (10 mA)
5 V (at 100 mA)
Limiting continuous current
Min. switching current
1 mA (12 V)
10 mA (at 12 V)
Interrupting rating (ohmic load) max.
1.2 W (24 V DC)
140 W (at 24 V DC)
1500 VA (for 250 V AC)
18 W (at 60 V DC)
20 W (at 48 V DC)
23 W (at 110 V DC)
40 W (at 220 V DC)
Utilization category CB Scheme (IEC 60947-5-1)
AC15, 1 A/250 V (N/C contact)
AC15, 3 A/250 V (N/O contact)
DC13, 0.1 A/220 V (N/O contact)
DC13, 0.2 A/110 V (N/O contact)
DC13, 1.5 A/24 V (N/O contact)
Note
the following values are applicable if a gold layer is destroyed
Switching capacity
0.1 A (at 220 V, DC13)
0.2 A (at 110 V, DC13)
2 A (at 24 V, DC13)
3 A (at 120 V, AC15)
3 A (at 230 V, AC15)
3 A (at 24 V, AC15)
Conductor cross-section rigid
Conductor cross-section flexible
0.14 mm² ... 1.5 mm²
0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
Conductor cross-section AWG
Flammability rating according to UL 94 (Housing)