Mechanical service life
10x 10<sup>6</sup> cycles
approx. 10<sup>7</sup> cycles
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Typical response time
125 ms (For U<sub>s </sub>autostart)
Typical release time
10 ms (on demand via the sensor circuit)
Recovery time
1 s (following demand of the safety function)
Maximum power dissipation for nominal condition
16.44 W (U<sub>S</sub> = 26.4 V, I<sub>L</sub>² = 72 A², P<sub>Total max</sub> = 2.04 W + 14.4 W)
Rated surge voltage/insulation
4 kV / Basic isolation, (safe isolation, reinforced insulation and 6 kV between input circuit and enabling current paths.)
Input voltage range "0" signal
Input voltage range "1" signal
Input current range "0" signal
Inrush current
max. 110 mA (typ. with U<sub>S</sub>, Δt = 3 ms)
max. 6 A
min. 10 mA
Filter time
max. 2 ms (Test pulse width low test pulses, at 100 ms test pulse rate)
No brightness test pulses / high test pulses permitted.
Max. permissible overall conductor resistance
Output description
2 N/C contacts parallel, non-safety-related, floating
2 N/O contacts each in series, safety-related, floating
Contact switching type
1 signaling current path
3 enabling current paths
Switching voltage
max. 250 V AC/DC
min. 10 V
min. 10 V AC/DC
Switching capacity
1.5 A (AC15)
2 A (DC13)
5 A (AC15)
6 A (DC13)
Limiting continuous current
6 A
6 A (Observe derating and load limit curve)
Sq. Total current
36 A<sup>2</sup>
72 A<sup>2</sup> (observe derating)
Output fuse
10 A gL/gG
4 A gL/gG (for low-demand applications)
6 A gL/gG
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section, flexible, with ferrule, without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section AWG