Notes on operation
If this device is to be used in combination with the CrossPowerSystem power distribution board, the device mount for the 16 A fuse (order designation: EM-CPS-DA-22,5F/16A; order number: 1002668) is required in order to attach the hybrid motor starter
Rated control circuit supply voltage US
Rated control supply current IS
Rated actuating voltage UC
Rated actuating current IC
Rated operating voltage Ue
Rated operating current Ie
0.6 A (AC-51)
0.6 A (AC-53a)
Maximum power dissipation for nominal condition
Maximum power dissipation
Minimum power dissipation
Rated control circuit supply voltage U<sub>S</sub>
Control supply voltage range
Rated control supply current I<sub>S</sub>
Protective circuit
Reverse polarity protection
Surge protection
Insulation characteristics between the control input and control supply voltage, and auxiliary circu
Basic insulation (IEC 60947-1) at operating voltage 300 V AC ... 500 V AC
Safe isolation (IEC 60947-1) at operating voltage ≤ 300 V AC
Isolation characteristics between the control input and control supply voltage to auxiliary circuit
Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC
Rated actuating voltage U<sub>C</sub>
Rated actuating current I<sub>C</sub>
Switching threshold
19.2 V (“1” signal)
9.6 V (“0” signal)
Switching level
< 5 V DC (For EMERGENCY STOP)
Note
800 V semiconductor
Confirmation: floating change-over contact, signal contact
Motor protection
Safe shutdown
Rated operating voltage U<sub>e</sub>
Rated operating current I<sub>e</sub>
0.6 A (AC-51)
0.6 A (AC-53a)
Load current range
75 mA ... 600 mA (see to derating)
Trigger characteristic in acc. with IEC 60947-4-2
Switching capacity in accordance with IEC 60947-5-1
2 A (24 V (DC13))
3 A (230 V, AC15)
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG