Inrush current integral (I2t)
< 0.5 A<sup>2</sup>s (typ.)
Nominal input voltage range
Extended input voltage range in operation
2x 264 V AC ... 320 V AC (Derating 10 %)
Nominal output current (IN)
3.38 A (Derating 10 %)
3.75 A
Derating
2x 264 V AC ... 320 V AC (Derating 10 %)
55 °C ... 70 °C (2.5 %/K)
Input voltage range AC
264 V AC ... 575 V AC (<320 V AC derating 2.5%/10 V)
Voltage type of supply voltage
Inrush current integral (I<sup>2</sup>t)
< 0.5 A<sup>2</sup>s (typ.)
Frequency range (f<sub>N</sub>)
Mains buffering time
> 100 ms (500 V AC)
> 65 ms (400 V AC)
Current consumption
typ. 0.48 A (500 V AC)
typ. 0.55 A (400 V AC)
Nominal power consumption
Protective circuit
Transient surge protection; Varistor
Input fuse
2 A (slow-blow, internal)
Recommended breaker for input protection
6 A ... 16 A (Characteristics B, C, D, K)
Efficiency
typ. 89 % (400 V AC)
typ. 89 % (480 V AC)
Nominal output current (I<sub>N</sub>)
3.38 A (Derating 10 %)
3.75 A
Feedback voltage resistance
Protection against overvoltage at the output (OVP)
Control deviation
< 0.1 % (change in input voltage ±10 %)
< 1 % (change in load, static 10 % ... 90 %)
< 3 % (Dynamic load change 10 % ... 90 %, 10 Hz)
Residual ripple
< 50 mV<sub>PP</sub> (with nominal values)
Maximum no-load power dissipation
Power loss nominal load max.
Rise time
< 0.5 s (U<sub>OUT</sub> (10 % ... 90 %))
Conductor cross-section, rigid min.
Conductor cross-section, rigid max.
Conductor cross-section flexible min.
Conductor cross-section flexible max.
Single conductor/flexible terminal point with ferrule with plastic sleeve, min.
Single conductor/flexible terminal point with ferrule with plastic sleeve, max.
Single conductor/flexible terminal point with ferrule without plastic sleeve, min.
Single conductor/flexible terminal point with ferrule without plastic sleeve, max.
Conductor cross-section AWG min.
Conductor cross-section AWG max.