Rated actuating voltage UC
Voltage range with reference to UC
Rated actuating current IC
"0" signal switching threshold in reference to UC
"1" signal switching threshold in reference to UC
Date of last data management
Maximum power dissipation for nominal condition
Test voltage (Input/output)
2.5 kV (50 Hz, 1 min., input/output)
Rated actuating voltage UC
Voltage range with reference to UC
Rated actuating current IC
"0" signal switching threshold in reference to UC
"1" signal switching threshold in reference to UC
Protective circuit
RCV circuit
Reverse polarity protection
Surge protection
Limiting continuous current
Max. load value
340 A2s (tp = 10 ms, at 25 °C)
Voltage drop at max. limiting continuous current
Output circuit
2-conductor, zero voltage switch
Conductor cross-section rigid
Conductor cross-section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross-section AWG
Tightening torque
0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing))