Typ. starting time with Us
30 ms (when controlled via A1)
Rated control circuit supply voltage US
20.4 V DC ... 26.4 V DC
24 V DC -15 % / +10 %
Rated control supply current IS
Application
Ex
Low demand
Safe switch on
Diagnostic supply voltage UD
Input current at UD
typ. 15 mA (24V/A2; depending on load M1 +100 mA)
Inrush current at UD
2.5 A (24V/A2; for 10 µs)
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Typ. starting time with U<sub>s</sub>
30 ms (when controlled via A1)
Typical release time
30 ms (when controlled via A1)
Maximum power dissipation for nominal condition
Rated surge voltage/insulation
6 kV/safe isolation (through protective impedance)
Rated control circuit supply voltage U<sub>S</sub>
20.4 V DC ... 26.4 V DC
24 V DC -15 % / +10 %
Rated control supply current I<sub>S</sub>
Inrush current
≤ 200 mA
200 mA (Inputs TP1, TP2 and TP3)
max. 5 A
min. 100 mA
Filter time
< 2 ms (Test pulse duration)
≥ 100 ms (Test pulse rate)
Protective circuit
Overload protection; Suppressor diode
Diagnostic supply voltage U<sub>D</sub>
Input current at U
typ. 15 mA (24V/A2; depending on load M1 +100 mA)
Inrush current at U<sub>D</sub>
2.5 A (24V/A2; for 10 µs)
Current consumption
typ. 18 mA (Input TP2)
typ. 20 mA (Input TP1)
typ. 35 mA (Input TP3)
Output description
non-safety-related
safety-related N/O contacts
Number of outputs
1 (digital)
1 (undelayed)
Switching voltage
max. 125 V DC
max. 250 V AC
min. 15 V AC/DC (without diagnostics)
min. 20 V AC/DC (with diagnostics)
Max. permissible overall conductor resistance
< 10 Ω (Max. line resistance in the event of a short circuit of the load between LO and NI (or LO' and NI'))
Limiting continuous current
Diagnostic threshold
20 Ω ... 18 kΩ (lower/upper)
Mechanical service life
approx. 5x 10<sup>7</sup> cycles