Primary rated current Ipn
0 A AC ... 100 A AC
0 A AC ... 1000 A AC
0 A AC ... 1500 A AC
0 A AC ... 2000 A AC
0 A AC ... 250 A AC
0 A AC ... 400 A AC
0 A AC ... 4000 A AC
0 A AC ... 630 A AC
Max. distances for copper cables at PN max
16 m (0.75 mm² (AWG 20))
32 m (1.5 mm² (AWG 16))
55 m (2.5 mm² (AWG 14))
Product family
Rogowski coil and 1 A measuring transducer
Overvoltage category
III (1000 V, to neutral conductor)
IV (600 V, to neutral conductor)
Electrical isolation
Reinforced insulation in accordance with IEC 61010-1
Protective circuit
Surge protection; 33 V suppressor diode
Temperature coefficients
0.005 %/K (+10 °C ... +70 °C, both components have the same ambient temperature)
0.07 %/K (-20 °C ... +10 °C, both components have the same ambient temperature)
Conductor structure signal line
1x 0.22 mm (Shielding (tinned))
2x 0.22 mm (Signal (tinned))
Rated insulation voltage
1000 V AC (rms CAT III)
600 V AC (rms CAT IV)
Test voltage
1.5 kV AC (Supply/input and output: 50 Hz, 1 min)
10.45 kV DC (60 s)
Linearity error
< 0.5 % (From the range end value)
Maximum transmission error
≤ 0.5 % (From the range end value)
Max. detectable harmonics
Converter type
Rogowski coil and 1 A measuring transducer
Nominal supply voltage range
Designation
Measuring coil
Measuring transducer
Frequency measuring range
Input impedance
27 kΩ (smallest measuring range)
Configurable/programmable
Primary rated current I<sub>pn</sub>
0 A AC ... 100 A AC
0 A AC ... 1000 A AC
0 A AC ... 1500 A AC
0 A AC ... 2000 A AC
0 A AC ... 250 A AC
0 A AC ... 400 A AC
0 A AC ... 4000 A AC
0 A AC ... 630 A AC
Output signal (at 50 Hz)
100 mV (no load, at 1,000 A)
Output voltage (in no-load operation)
V<sub>OUT</sub> = M * dI/dt
Output voltage (sinusoidal, in no-load operation)
100 mV (V<sub>OUT</sub> = 2 * π * M * f * I (M = 0.318 μH; example: At 50 Hz; I = 1,000 A))
Max. distances for copper cables at P<sub>N max</sub>
16 m (0.75 mm² (AWG 20))
32 m (1.5 mm² (AWG 16))
55 m (2.5 mm² (AWG 14))
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG
Operating voltage display