EMC note
EMC: class A product, see manufacturer's declaration in the download area
Configuration
App
DIP switches
Software
Electrical isolation between input and output
Step response (0–99%)
140 ms (15 Hz sample rate)
25 ms (240 Hz sample rate, can only be set via software)
45 ms (60 Hz sample rate)
Maximum temperature coefficient
Maximum transmission error
≤ 0.05 % (of the maximum value of the configured output range)
Standards/regulations
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-6-4
GB/T 3836.1
GB/T 3836.3
IEC/EN 61010-1
Supply voltage range
9.6 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715)
Typical current consumption
110 mA (12 V DC)
55 mA (24 V DC)
Power consumption (I output)
1.5 W (at I<sub>OUT</sub> = 20 mA, 9.6 V DC, 600 Ω load)
Configurable/programmable
Voltage input signal
0 V ... 10 V (via DIP switch)
0 V ... 12 V (can be set via software)
0 V ... 5 V (via DIP switch)
1 V ... 5 V (via DIP switch)
2 V ... 10 V (via DIP switch)
Max. voltage input signal
Current input signal
0 mA ... 10 mA (via DIP switch)
0 mA ... 20 mA (via DIP switch)
0 mA ... 24 mA (can be set via software)
20 mA ... 0 mA (via DIP switch)
4 mA ... 20 mA (via DIP switch)
Max. current input signal
Input resistance of voltage input
Input resistance current input
~ 50 Ω (+0.7 V for test diode)
Voltage output signal
0 V ... 10 V (via DIP switch)
0 V ... 10.5 V (can be set via software)
0 V ... 5 V (via DIP switch)
1 V ... 5 V (via DIP switch)
2 V ... 10 V (via DIP switch)
Max. voltage output signal
Current output signal
0 mA ... 10 mA (via DIP switch)
0 mA ... 20 mA (via DIP switch)
0 mA ... 21 mA (can be set via software)
20 mA ... 0 mA (via DIP switch)
4 mA ... 20 mA (via DIP switch)
Max. current output signal
Load/output load voltage output
Load/output load current output
Ripple
< 20 mV<sub>PP</sub> (600 Ω)
Connection method
Micro USB type B
Push-in connection
Conductor cross-section rigid
0.14 mm² ... 2.5 mm² (without ferrule)
0.2 mm² ... 2.5 mm² (with ferrule)
Conductor cross-section flexible
Conductor cross-section AWG
Status display
Green LED (supply voltage)