Rated control circuit supply voltage US
Voltage range with reference to US
Rated control supply current IS
Rated actuating voltage UC
Voltage range with reference to UC
Rated actuating current IC
"0" signal switching threshold in reference to UC
"1" signal switching threshold in reference to UC
Date of last data management
Test voltage
4 kV<sub>rms</sub> (50 Hz, 1 min., winding/contact)
Rated control circuit supply voltage U<sub>S</sub>
Voltage range with reference to U<sub>S</sub>
Rated control supply current I<sub>S</sub>
Rated actuating voltage U<sub>C</sub>
Voltage range with reference to U<sub>C</sub>
Rated actuating current I<sub>C</sub>
Nominal voltage (plugged-in solid-state relay)
"0" signal switching threshold in reference to U<sub>C</sub>
"1" signal switching threshold in reference to U<sub>C</sub>
Protective circuit
Inverse diode (No continuous protection against polarity reversal)
Reverse polarity protection
Surge protection
Varistor
Limiting continuous current
10 A (see derating curve)
Maximum inrush current
60 A (5 ms; T<sub>amb</sub> = 60°C)
Output circuit
2-conductor / N/O contact in parallel operation (no electrical disconnection)
Conductor cross-section rigid
Conductor cross-section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross-section AWG
Tightening torque
0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing))