Protective conductor current IPE
Standby power consumption PC
Nominal discharge current In (8/20) µs
Maximum discharge current Imax (8/20) µs
Impulse discharge current (10/350) µs, peak value limp
Type
DIN rail module, one-piece
Total discharge current ITotal (8/20) µs
Installation location of the disconnect device
Total discharge current ITotal (10/350) µs
Voltage protection level Up
Residual voltage Ures
≤ 2.5 kV (at 3 kA)
≤ 2.7 kV (at 6.25 kA)
≤ 2.9 kV (at 10 kA)
≤ 3.1 kV (at 15 kA)
≤ 3.3 kV (at I<sub>n</sub>)
≤ 4 kV (at 40 kA)
End-of-life mode
OCFM (Open-Circuit Failure Mode)
Maximum continuous operating voltage UCPV
Surge protection fault message
Short-circuit current rating ISCPV
Open-circuit voltage UOCSTC
Insulation resistance Riso
Continuous operating current ICPV
Conductor cross-section flexible
Conductor cross-section AWG
Flammability rating according to UL 94
Mode of protection
(L-) - PE
(L+) - (L-)
(L+) - PE
Direction of action
(L+)-PE & (L-)-PE & (L+)-(L-)
Rated load current I<sub>L</sub>
Protective conductor current I<sub>PE</sub>
Standby power consumption P<sub>C</sub>