Electrical isolation between input and output
Maximum temperature coefficient
Maximum transmission error
Standards/regulations
EN 61000-6-4
GB/T 3836.1
GB/T 3836.3
GB/T 3836.8
IEC/EN 60079-7
IEC/EN 61010-1
Rated insulation voltage
250 V AC
300 V AC
375 V AC
Nominal supply voltage range
12 V DC ... 24 V DC -20 % ... +25 %
Typical current consumption
Voltage input signal
0.1 V ... 10 V
0.1 V ... 10.5 V (Maximum range)
Total error of the voltage input maximum
Current input signal
0.18 mA ... 21 mA (Maximum range)
0.2 mA ... 20 mA
Total error of the current input maximum
Input resistance of voltage input
Input resistance current input
Switching threshold "0" signal current
Configurable via DIP switch (in 1.25% increments) and potentiometer (linearly up to 2% of the switching threshold set via the DIP switch)
Switching hysteresis
off: approx. 0.5 %, on: approx. 1 %
Line fault detection
< 0.1 mA (Line break)
> 21.1 mA (Short circuit)
Contact material
AgSnO<sub>2</sub>, hard gold-plated
Max. switching current
≤ 0.2 A DC (ohmic load, 120 V DC)
≤ 1 A DC (ohmic load, 24 V DC, 50 mW)
≤ 4 A AC (cos phi = 1)
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG
Status display
Green LED (supply voltage)
Red LED, flashing (line, sensor error, ERR)
Yellow LED (switching output)
Depth NS 35/7,5
114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715)
Flammability rating according to UL 94 (Housing)