Current consumption IN (UN, IOUT = IN, Icharge = 0)
General
EtherCAT® is a registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
Current consumption Imax (UN, IOUT = IStat.Boost, ICharge = max)
Input voltage range
18 V DC ... 30 V DC
18 V DC ... 32 V DC
Current consumption INo-Load(UN, IOUT = 0, Icharge = 0)
Electric strength, max.
35 V DC (Protected against polarity reversal)
Current consumption Icharge (UN, IOUT = 0, Icharge = max)
Power consumption PN (UN, IOUT = IN, Icharge = 0)
Voltage type of supply voltage
Power consumption Pmax (UN, IOUT = IStat.Boost, Icharge = max)
Power consumption PNo-Load (UN, IOUT = 0, Icharge = 0)
Reverse polarity protection
Power consumption Pcharge (UN, IOUT = 0, Icharge = max)
Dynamic activation threshold
Static Boost (IStat.Boost)
Dynamic Boost (IDyn.Boost)
Switch-on time during battery operation (Bat.-Start)
Selective Fuse Breaking (ISFB)
Voltage drop, input/output
Current consumption I<sub>N</sub> (U<sub>N</sub>, I<sub>OUT</sub> = I<sub>N</sub>, I<sub>charge</sub
Output power POUT (UN, IOUT = IN)
Current consumption I<sub>max</sub> (U<sub>N</sub>, I<sub>OUT</sub> = I<sub>Stat.Boost</sub>, I<sub>
Output power POUT (UN, IOUT = Istat.Boost)
Current consumption I<sub>No-Load</sub>(U<sub>N</sub>, I<sub>OUT</sub> = 0, I<sub>charge</sub> = 0)
Output power POUT (UN, IOUT = Idyn.Boost)
Current consumption I<sub>charge</sub> (U<sub>N</sub>, I<sub>OUT</sub> = 0, I<sub>charge</sub> = max
Power dissipation No load (UN, IOut = 0, ICharge = 0)
Power consumption P<sub>N</sub> (U<sub>N</sub>, I<sub>OUT</sub> = I<sub>N</sub>, I<sub>charge</sub>
Power dissipation Nominal load (UN, IOut = IN, ICharge = 0)
Power consumption P<sub>max</sub> (U<sub>N</sub>, I<sub>OUT</sub> = I<sub>Stat.Boost</sub>, I<sub>ch
Power consumption P<sub>No-Load</sub> (U<sub>N</sub>, I<sub>OUT</sub> = 0, I<sub>charge</sub> = 0)
Power consumption P<sub>charge</sub> (U<sub>N</sub>, I<sub>OUT</sub> = 0, I<sub>charge</sub> = max)
UPS connection in parallel
yes, with decoupling modules (to increase the buffer time and for redundancy)
Energy storage device connection in parallel
Yes, 5 (observe line protection)
Energy storage device connection in series
Output voltage range
18 V DC ... 32 V DC
19 V DC ... 32 V DC (U<sub>OUT</sub> = U<sub>BAT</sub> - 0.3 V DC)
Output current I<sub>N</sub>