Mechanical service life
approx. 2x 10<sup>7</sup> cycles
Passing make contact function
Passing break contact function
Flashing function beginning with pause, fixed time
Service life electrical
approx. 2x 10<sup>5</sup> cycles at ohmic load, 1000 VA
Clocking function beginning with pause, variable
Flashing function beginning with pulse, fixed time
Nominal power consumption
Clocking function beginning with pulse, variable
Test voltage relay winding/relay contact
Input voltage range
24 V AC/DC ... 240 V AC/DC -10 % ... +15 %
Temperature coefficient, typical
Function
li: Switched-mode beginning with the pulse
lp: Switched-mode beginning with the pause
Setting range time
50 ms ... 100 h (7 time end ranges)
Basic accuracy
± 1 % (of scale end value)
Setting accuracy
≤ 5 % (of scale end value)
Connection name
Non-floating, terminals A1-B1
Control pulse length
≥ 100 ms (AC)
≥ 50 ms (DC)
Contact switching type
1 floating changeover contact
Maximum switching voltage
250 V AC (in acc. with IEC 60664-1)
Interrupting rating (ohmic load) max.
1250 VA (5 A/250 V AC, module not aligned, ≥ 5 mm spacing)
750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing)
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG
Status display
Green LED (POWER)
Yellow LED (relay active)
Flammability rating according to UL 94
Degree of protection (Housing)
Degree of protection (Connection terminal blocks)
IP20 (Connection terminal blocks)
Ambient temperature (operation)
-25 °C ... 40 °C (corresponds to UL 508)
-25 °C ... 55 °C
Ambient temperature (storage/transport)