Nominal input voltage range
Static Boost (IStat.Boost)
Dynamic Boost (IDyn.Boost)
Input voltage range
8 V DC ... 26 V DC (SELV)
Selective Fuse Breaking (ISFB)
Typical national grid voltage
Nominal input current (IN)
Voltage type of supply voltage
Dynamic Boost (I<sub>Dyn.Boost</sub>)
Nominal output current (IN)
Selective Fuse Breaking (I<sub>SFB</sub>)
Reverse polarity protection
UIn < 8 V DC
LED off, input voltage not present or short circuit at redundancy module output
Nominal input current (I<sub>N</sub>)
UIn > 8 V DC
LED lights up green, input voltage present
Input current I<sub>Static</sub>
UIn > 28.8 V DC
LED flashing red, OVP active - input voltage exceeds the permissible voltage value
Input current I<sub>Dynamic</sub>
Input current I<sub>SFB</sub>
Transient surge protection
Voltage drop, input/output
Efficiency
typ. 99 % (12 V DC)
typ. 99.2 % (24 V DC)
Nominal output voltage
U<sub>In</sub> - 0,1 V DC
Nominal output current (I<sub>N</sub>)
Derating
60 °C ... 70 °C (2.5 %/K)
Protection against overvoltage at the output (OVP)
Power loss nominal load max.
6 W (I<sub>OUT</sub> = 40 A)
6.5 W (I<sub>OUT</sub> = 40 A)
Maximum switching voltage
Maximum inrush current
≤ 100 mA (short-circuit-proof)
Connection method
Push-in connection
Screw connection
Conductor cross-section, rigid min.
Conductor cross-section, rigid max.
Conductor cross-section flexible min.
Conductor cross-section flexible max.
Single conductor/flexible terminal point with ferrule with plastic sleeve, min.
Single conductor/flexible terminal point with ferrule with plastic sleeve, max.
Single conductor/flexible terminal point with ferrule without plastic sleeve, min.
Single conductor/flexible terminal point with ferrule without plastic sleeve, max.
Conductor cross-section AWG min.
Conductor cross-section AWG max.