Maximum continuous operating voltage UC
135 V AC (for operation in safety lighting systems)
150 V DC
Rated load current IL
40 A (Biconnect M4 fork-type cable lug 6 mm²)
63 A (TWIN ferrule 2 x 10 mm²)
Protective conductor current IPE
Nominal discharge current In (8/20) µs
Maximum discharge current Imax (8/20) µs
Type
DIN rail module, two-section, divisible
Impulse discharge current (10/350) µs, peak value limp
Surge protection fault message
Optical, remote indicator contact
Total discharge current ITotal (8/20) µs
Short-circuit current rating ISCCR
0.2 kA (without backup fuse)
6 kA (for 20 A gG/B backup fuse)
Voltage protection level Up (DC+) - (DC-)
Voltage protection level Up (DC+/DC-) - PE
Nominal voltage U<sub>N</sub>
TOV behavior at UT
174 V DC (5 s / withstand mode)
Connection name
Remote fault indicator contact
Nominal discharge current In
Operating voltage
125 V AC
125 V DC (200 mA DC)
5 V AC ... 150 V AC (Altitude > 2000 m (amsl))
5 V AC ... 250 V AC (Altitude ≤ 2000 m (amsl))
Operating current
1 A DC (30 V DC)
5 mA AC ... 1 A AC
Connection method
Fork-type cable lug
Plug-in/screw connection via COMBICON
Screw connection
Tightening torque
0.25 Nm
30 lb<sub>f</sub>-in.
4.5 Nm
Conductor cross-section flexible
0.14 mm² ... 1.5 mm²
1.5 mm² ... 6 mm²
2.5 mm² ... 16 mm²
Conductor cross-section rigid
0.14 mm² ... 1.5 mm²
2.5 mm² ... 25 mm²
Conductor cross-section AWG
10 ... 2
12 ... 4
28 ... 16
Depth
74.5 mm (incl. DIN rail 7.5 mm)
Flammability rating according to UL 94
Mode of protection
(DC-) - G
(DC+) - (DC-)
(DC+) - G
(DC+/DC-) - PE