Current consumption Imax (UN, IOUT = IStat.Boost, ICharge = max)
Current consumption INo-Load(UN, IOUT = 0, Icharge = 0)
Current consumption Icharge (UN, IOUT = 0, Icharge = max)
Voltage type of supply voltage
Current consumption I<sub>max</sub> (U<sub>N</sub>, I<sub>OUT</sub> = I<sub>Stat.Boost</sub>, I<sub>
Output current IN
20 A
20 A (depending on output current)
Current consumption I<sub>No-Load</sub>(U<sub>N</sub>, I<sub>OUT</sub> = 0, I<sub>charge</sub> = 0)
Static Boost (IStat.Boost)
Current consumption I<sub>charge</sub> (U<sub>N</sub>, I<sub>OUT</sub> = 0, I<sub>charge</sub> = max
Efficiency
> 98 % (with charged energy storage device)
Output voltage
24 V (U<sub>N</sub> - 2 V (typical))
24 V DC (depending on the input voltage)
30 V DC
typ. 22 V DC
Output current I<sub>N</sub>
20 A
20 A (depending on output current)
Power loss nominal load max.
Switching output
Electronic relays (OptoMOS)
Transistor output, active
LED status indicator
green (Ready)
green (U<sub>In</sub> OK)
Signal threshold
Input voltage in the valid range
State condition (configurable)
State of charge = 100% or buffer mode
Insulation voltage input, output / housing
MTBF (IEC 61709, SN 29500)
Protection class
Special application (SELV input voltage, hazardous voltages are generated in the device).
Temperature
30 °C
40 °C
45 °C
50 °C
60 °C
Time
102154 h
144468 h
288935 h
36117 h
72234 h
Installation distance right/left
Installation distance top/bottom
Assembly note
alignable: horizontally 0 mm, vertically 50 mm
Mounting position
horizontal DIN rail NS 35, EN 60715