Setting range of the output voltage (USet)
MTBF (IEC 61709, SN 29500)
> 500000 h (230 V AC, at 40 °C)
Nominal output current (IN)
Overvoltage category (EN 61010-1)
Input voltage range
100 V AC ... 240 V AC -15 % ... +10 %
110 V DC ... 250 V DC
Frequency range (f<sub>N</sub>)
Current consumption
1.1 A (250 V DC)
1.2 A (240 V AC)
2.4 A (110 V DC)
2.7 A (100 V AC)
Input fuse
6.3 A (internal (device protection), slow-blow)
Recommended breaker for input protection
10 A ... 16 A (AC: Characteristic B, C, D, K, or comparable)
Setting range of the output voltage (U<sub>Set</sub>)
Nominal output current (I<sub>N</sub>)
Maximum no-load power dissipation
Power loss nominal load max.
Signal ground SGnd
Reference ground signal contacts
Nominal voltage U<sub>N</sub>
Battery technology
VRLA, VRLA-WTR, LI-ION (LiFePO<sub>4</sub>)
Charge characteristic curve
Connection method
Push-in connection
Screw connection
Conductor cross-section, rigid min.
Conductor cross-section, rigid max.
Conductor cross-section flexible min.
Conductor cross-section flexible max.
Single conductor/flexible terminal point with ferrule with plastic sleeve, min.
Single conductor/flexible terminal point with ferrule with plastic sleeve, max.
Single conductor/flexible terminal point with ferrule without plastic sleeve, min.
Single conductor/flexible terminal point with ferrule without plastic sleeve, max.
Conductor cross-section AWG min.
Conductor cross-section AWG max.