B10d (AC1)
1800000 Cycles (250 V / 1,5 A; 1 NO)
600000 Cycles (250 V / 6 A; 1 NO)
900000 Cycles (250 V / 3 A; 1 NO)
B10d (AC15)
180000 Cycles (250 V / 3 A; 1 NO)
4600000 Cycles (250 V / 0,75 A; 1 NO)
560000 Cycles (250 V / 2 A; 1 NO)
B10d (DC13)
360000 Cycles (24 V / 3 A; 1 NO)
4200000 Cycles (24 V / 0,75 A; 1 NO)
740000 Cycles (24 V / 1,5 A; 1 NO)
Input voltage range in reference to UN
Mechanical service life
approx. 10<sup>7</sup> cycles
B<sub>10d</sub> (AC1)
1800000 Cycles (250 V / 1,5 A; 1 NO)
600000 Cycles (250 V / 6 A; 1 NO)
900000 Cycles (250 V / 3 A; 1 NO)
Typical input current at UN
B<sub>10d</sub> (AC15)
180000 Cycles (250 V / 3 A; 1 NO)
4600000 Cycles (250 V / 0,75 A; 1 NO)
560000 Cycles (250 V / 2 A; 1 NO)
B<sub>10d</sub> (DC13)
360000 Cycles (24 V / 3 A; 1 NO)
4200000 Cycles (24 V / 0,75 A; 1 NO)
740000 Cycles (24 V / 1,5 A; 1 NO)
Insulation
Safe isolation, reinforced insulation
Date of last data management
Maximum power dissipation for nominal condition
Test voltage (Winding/contact)
4 kV<sub>rms</sub> (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact)
2.5 kV<sub>rms</sub> (50 Hz, 1 min., changeover contact/changeover contact)
Nominal input voltage U<sub>N</sub>
Input voltage range
20.2 V DC ... 32.4 V DC (20 °C)
Input voltage range in reference to U<sub>N</sub>
Nominal voltage (plugged-in electromechanical relay)
Typical input current at U<sub>N</sub>
Operating voltage display
Contact switching type
2 changeover contacts, forcibly actuated
Maximum switching voltage
Minimum switching voltage
Limiting continuous current
Interrupting rating (ohmic load) max.
110 W (220 V DC)
144 W (24 V DC)
1500 VA (250 V AC)
288 W (48 V DC)
88 W (110 V DC)
Switching capacity
3 A (230 V, AC15)
3 A (24 V (DC13))
Force-guided contacts in accordance with EN 61810-3
Conductor cross-section rigid
Conductor cross-section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1 mm² (TWIN ferrule)