Maximum continuous operating voltage UC
Protective conductor current IPE
Type
DIN rail module, two-section, divisible
Standby power consumption PC
Nominal discharge current In (8/20) µs
Surge protection fault message
Maximum discharge current Imax (8/20) µs
Impulse discharge current (10/350) µs, peak value limp
Total discharge current ITotal (8/20) µs
Nominal frequency f<sub>N</sub>
Total discharge current ITotal (10/350) µs
Connection method
Biconnect terminal blocks
Screw connection
Short-circuit current rating ISCCR
Voltage protection level Up
≤ 1.2 kV
≤ 1.6 kV (30 kA - 8/20 µs)
Residual voltage Ures
≤ 0.9 kV (at 3 kA)
≤ 1 kV (at 5 kA)
≤ 1.1 kV (at 10 kA)
≤ 1.2 kV (at I<sub>n</sub>)
Tightening torque
3 Nm (1.5 mm² ... 16 mm²)
4.5 Nm (25 mm² ... 35 mm²)
TOV behavior at UT
415 V AC (5 s / withstand mode)
457 V AC (120 min / safe failure mode)
Conductor cross-section flexible
1.5 mm² ... 16 mm²
1.5 mm² ... 25 mm²
Conductor cross-section rigid
Conductor cross-section AWG
Depth
77.5 mm (incl. DIN rail 7.5 mm)
Color
traffic gray B (RAL 7043)
Flammability rating according to UL 94
Nominal voltage U<sub>N</sub>
Maximum continuous operating voltage U<sub>C</sub>
Rated load current I<sub>L</sub>