Connection method
Inline data jumper
Spring-cage connection
Transmission speed
500 kbps / 2 Mbps (can be switched)
Process data channel
8 Byte ((Operating mode: SafetyBridge))
Input address area
8 Byte ((Operating mode: SafetyBridge))
Output address area
8 Byte ((Operating mode: SafetyBridge))
Parameter channel (PCP)
0 Byte ((Operating mode: SafetyBridge))
Register length (bus)
8 Byte ((Operating mode: SafetyBridge))
Required parameter data
1 Byte ((Operating mode: SafetyBridge))
Required configuration data
5 Byte ((Operating mode: SafetyBridge))
Number of outputs
4
4 (for 1-channel assignment, + switching)
4 (for 2-channel assignment, +/- switching)
Output voltage
24 V DC (U<sub>S</sub> - 1 V)
Output current
max. 3 A (Total current of all outputs)
Maximum output current per channel
Max. current carrying capacity per output
Maximum output current per module
Behavior with inductive overload
Supply voltage
24 V
24 V DC
24 V DC (via voltage jumper)
7.5 V DC (see safety data)
Current draw
max. 230 mA
max. 3.03 A
typ. 30 mA (all outputs set including actuator current)
Supply voltage range
19.2 V DC ... 30 V DC
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Test voltage: 5 V supply, incoming remote bus/7.5 V supply (bus logics)
Test voltage: 5 V supply, outgoing remote bus/7.5 V supply (bus logics)
Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O)
Test voltage: 24 V supply (I/O) / functional ground
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG
Ambient temperature (operation)