Set comprises
2903330 RIF-1-RPT-LDP-24DC/2X21AU
Typical input current at UN
Date of last data management
Maximum power dissipation for nominal condition
Test voltage (Winding/contact)
Test voltage (Contact/contact)
2.5 kV AC (50 Hz, 1 min.)
Test voltage (open contact)
Nominal input voltage U<sub>N</sub>
Typical input current at U<sub>N</sub>
Contact material
AgNi
AgNi, hard gold-plated
Maximum switching voltage
250 V AC/DC
30 V AC
36 V DC
Minimum switching voltage
100 mV (at 10 mA)
5 V (at 10 mA)
Limiting continuous current
Min. switching current
1 mA (at 24 V)
10 mA (At 5 V)
Interrupting rating (ohmic load) max.
1.2 W (at 24 V DC)
190 W (at 24 V DC)
2000 VA (for 250 V AC)
44 W (at 110 V DC)
60 W (at 220 V DC)
60 W (at 60 V DC)
85 W (at 48 V DC)
Note
<b>the following values are applicable if a gold layer is destroyed</b>
Switching capacity
0.2 A (at 110 V, DC13)
0.2 A (at 250 V, DC13)
2 A (at 120 V, AC15)
2 A (at 24 V, AC15)
2 A (at 24 V, DC13)
2 A (at 250 V, AC15)
Ambient temperature (operation)
Ambient temperature (storage/transport)
Identification
EN 60068-2-60
ISA-S71.04. G3 Harsh Group
Standards/regulations
EN 50178
EN 61810-1
IEC 60664
Assembly note
Can be aligned without spacing (> 70 °C ≥ 2.5 mm)