Typical input current at UN
Date of last data management
Maximum power dissipation for nominal condition
Test voltage (Winding/contact)
4 kV AC (50 Hz, 1 min., winding/contact)
Nominal input voltage U<sub>N</sub>
Typical input current at U<sub>N</sub>
Contact material
AgSnO
AgSnO, hard gold-plated
Maximum switching voltage
Minimum switching voltage
100 mV (at 10 mA)
5 V (at 100 mA)
Limiting continuous current
Min. switching current
1 mA (at 24 V)
10 mA (at 12 V)
Interrupting rating (ohmic load) max.
1.2 W (at 24 V DC)
140 W (at 24 V DC)
1500 VA (for 250 V AC)
18 W (at 60 V DC)
20 W (at 48 V DC)
23 W (at 110 V DC)
40 W (at 220 V DC)
Note
<b>the following values are applicable if a gold layer is destroyed</b>
Switching capacity
0.1 A (at 220 V, DC13)
0.2 A (at 110 V, DC13)
2 A (at 24 V, DC13)
3 A (at 120 V, AC15)
3 A (at 230 V, AC15)
3 A (at 24 V, AC15)
Ambient temperature (operation)
Ambient temperature (storage/transport)
Identification
EN 60068-2-60
ISA-S71.04. G3 Harsh Group
Standards/regulations
EN 50178
EN 61810-1
IEC 60664
Assembly note
in rows with zero spacing