Typical input current at UN
Date of last data management
Maximum power dissipation for nominal condition
Test voltage (Winding/contact)
5 kV AC (50 Hz, 1 min., winding/contact)
Nominal input voltage U<sub>N</sub>
Typical input current at U<sub>N</sub>
Contact material
AgNi
AgNi, hard gold-plated
Maximum switching voltage
250 V AC/DC
30 V AC
36 V DC
Minimum switching voltage
100 mV (at 10 mA)
12 V (at 10 mA)
Limiting continuous current
Min. switching current
1 mA (at 24 V)
10 mA (at 12 V)
Interrupting rating (ohmic load) max.
1.2 W (at 24 V DC)
384 W (at 24 V DC)
4000 VA (for 250 V AC)
48 W (at 60 V DC)
50 W (at 110 V DC)
58 W (at 48 V DC)
80 W (at 220 V DC)
Switching capacity
0.2 A (at 110 V, DC13)
0.2 A (at 250 V, DC13)
2 A (at 120 V, AC15)
2 A (at 24 V, AC15)
2 A (at 24 V, DC13)
2 A (at 250 V, AC15)
Note
<b>the following values are applicable if a gold layer is destroyed</b>
Ambient temperature (operation)
Ambient temperature (storage/transport)
Identification
EN 60068-2-60
ISA-S71.04. G3 Harsh Group
Standards/regulations
EN 50178
EN 61810-1
IEC 60664
Assembly note
Can be aligned without spacing (> 70 °C ≥ 2.5 mm)