EMC note
EMC: class A product, see manufacturer's declaration in the download area
Nominal input voltage UN
110 V DC
120 V AC
The nominal voltage of the plug-on electromechanical relay or solid-state relay (see necessary accessories) deviates from the nominal input voltage of the base with integrated upstream circuit
Input voltage range in reference to UN
Typical input current at UN
7 mA (50 Hz)
8 mA (60 Hz)
Application
Filter to prevent interference
Switching threshold "0" signal in reference to UN
Protective circuit
Bridge rectifier; Bridge rectifier
Filter; Filter
RCV circuit
RCZ filter; RCZ filter
Reverse polarity protection
Surge protection
Nominal input voltage U<sub>N</sub>
110 V DC
120 V AC
The nominal voltage of the plug-on electromechanical relay or solid-state relay (see necessary accessories) deviates from the nominal input voltage of the base with integrated upstream circuit
Input voltage range in reference to U<sub>N</sub>
Typical input current at U<sub>N</sub>
7 mA (50 Hz)
8 mA (60 Hz)
Operating voltage display
Switching threshold "0" signal in reference to U<sub>N</sub>
Maximum switching voltage
253 V AC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
30 V DC
48 V DC
Minimum switching voltage
Limiting continuous current
Voltage drop at max. limiting continuous current
Maximum inrush current
15 A (10 ms)
30 A (10 ms)
Conductor cross-section rigid
Conductor cross-section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross-section AWG
Flammability rating according to UL 94 (Housing)
Ambient temperature (operation)
Ambient temperature (storage/transport)
Certificate
CE-compliant
TAE0000196
UKCA-compliant
Identification
EN 60068-2-60
ISA-S71.04. G3 Harsh Group
Enclosure
Required protection according to the Rules shall be provided upon installation on board