EMC note
EMC: class A product, see manufacturer's declaration in the download area
Nominal input voltage UN
220 V DC
230 V AC
The nominal voltage of the plug-on electromechanical relay or solid-state relay (see necessary accessories) deviates from the nominal input voltage of the base with integrated upstream circuit
Input voltage range in reference to UN
0.78 ... 1.14
0.8 ... 1.1
Typical input current at UN
10 mA (60 Hz)
8.8 mA (50 Hz)
Application
Filter to prevent interference
Switching threshold "0" signal in reference to UN
Protective circuit
Bridge rectifier; Bridge rectifier
Filter; Filter
RCV circuit
RCZ filter; RCZ filter
Reverse polarity protection
Surge protection
Nominal input voltage U<sub>N</sub>
220 V DC
230 V AC
The nominal voltage of the plug-on electromechanical relay or solid-state relay (see necessary accessories) deviates from the nominal input voltage of the base with integrated upstream circuit
Input voltage range in reference to U<sub>N</sub>
0.78 ... 1.14
0.8 ... 1.1
Typical input current at U<sub>N</sub>
10 mA (60 Hz)
8.8 mA (50 Hz)
Operating voltage display
Switching threshold "0" signal in reference to U<sub>N</sub>
Maximum switching voltage
253 V AC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
30 V DC
48 V DC
Minimum switching voltage
Limiting continuous current
Voltage drop at max. limiting continuous current
< 1 V AC
< 1 V DC
< 200 mV
Maximum inrush current
15 A (10 ms)
30 A (10 ms)
Conductor cross-section rigid
Conductor cross-section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross-section AWG
Flammability rating according to UL 94 (Housing)
Ambient temperature (operation)
Ambient temperature (storage/transport)
Certificate
CE-compliant
TAE0000196
UKCA-compliant
Identification
EN 60068-2-60
ISA-S71.04. G3 Harsh Group
Enclosure
Required protection according to the Rules shall be provided upon installation on board