Typical input current at UN
Application
Filter to prevent interference
Date of last data management
Maximum power dissipation for nominal condition
Test voltage (Winding/contact)
4 kV AC (50 Hz, 1 min., winding/contact)
Test voltage (Changeover contact/changeover contact)
2.5 kV AC (50 Hz, 1 min., changeover contact/changeover contact)
Rated surge voltage
4 kV (Safe isolation, reinforced insulation, and 6 kV between input circuit and output contact current paths)
Nominal input voltage U<sub>N</sub>
Input voltage range
171.6 V DC ... 253 V DC (20 °C)
179.4 V AC ... 264.5 V AC (20 °C)
Nominal voltage (plugged-in electromechanical relay)
Typical input current at U<sub>N</sub>
Maximum switching voltage
Minimum switching voltage
Limiting continuous current
Interrupting rating (ohmic load) max.
140 W (24 V DC)
1500 VA (250 V AC)
44 W (110 V DC)
60 W (220 V DC)
60 W (60 V DC)
85 W (48 V DC)
Switching capacity
0.2 A (at 250 V, DC13)
2 A (at 24 V, DC13)
3 A (at 120 V, AC15)
3 A (at 24 V, AC15)
3 A (at 250 V, AC15)
Conductor cross-section rigid
Conductor cross-section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross-section AWG
Flammability rating according to UL 94 (Housing)