Input voltage range in reference to UN
Application
With integrated solid-state relay
Switching threshold "0" signal in reference to UN
Switching threshold "1" signal in reference to UN
Typical input current at UN
Date of last data management
Maximum power dissipation for nominal condition
Nominal input voltage U<sub>N</sub>
Input voltage range in reference to U<sub>N</sub>
Switching threshold "0" signal in reference to U<sub>N</sub>
Switching threshold "1" signal in reference to U<sub>N</sub>
Typical input current at U<sub>N</sub>
Operating voltage display
Protective circuit
Reverse polarity protection; Polarity protection diode
Surge protection; Varistor
Output voltage range
12 V DC ... 300 V DC (Partition plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal points in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Limiting continuous current
Voltage drop at max. limiting continuous current
Conductor cross-section rigid
Conductor cross-section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross-section AWG
Tightening torque
0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing))
Flammability rating according to UL 94 (Housing)
Ambient temperature (operation)
Ambient temperature (storage/transport)
Certificate
CE-compliant
TAE0000196
UKCA-compliant
Identification
EN 60068-2-60
ISA-S71.04. G3 Harsh Group