Typ. starting time with Us
10 ms (with Us / when controlled via A1)
Rated control circuit supply voltage US
Application
High demand
Low demand
Safe switch off
Rated control supply current IS
Mechanical service life
10x 10<sup>6</sup> cycles
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Typ. starting time with U<sub>s</sub>
10 ms (with Us / when controlled via A1)
Typical release time
10 ms (with Us / when controlled via A1)
Maximum power dissipation for nominal condition
5.87 W (at U<sub>B</sub> = 26.4 V DC, U<sub>S</sub> = 24 V, I<sub>S</sub> = 30 mA, n = 1, I<sub>L</sub>² = 50 A², R<sub>contact</sub> = 0.1 )
Rated surge voltage/insulation
See data sheet, section “Insulation coordination”.
Rated control circuit supply voltage U<sub>S</sub>
Rated control supply current I<sub>S</sub>
Power consumption at U<sub>S</sub>
Filter time
1 ms (at A1-A2; test pulse width)
1 s (at A1-A2; test pulse rate)
Switching voltage
max. 250 V AC/DC
min. 5 V AC/DC
Switching capacity
3 A (AC15, 250 V)
3 A (DC13, 24 V)
Limiting continuous current
3.5 A (N/C contact)
5 A (N/O contact)
Interrupting rating (ohmic load) max.
Output fuse
4 A gL/gG NEOZED (N/C contact)
4 A gL/gG NEOZED (N/O contact, low demand)
6 A gL/gG NEOZED (N/O contact)
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG
Operating voltage display