Typ. starting time with Us
< 600 ms (with Us / when controlled via A1)
Rated control circuit supply voltage US
Application
Emergency stop
Light grid
Safety door
Rated control supply current IS
typ. 155 mA (at U<sub>S</sub>)
Mechanical service life
10x 10<sup>6</sup> cycles
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Typical response time
< 600 ms (automatic start)
< 70 ms (Monitored/manual start)
Typ. starting time with U<sub>s</sub>
< 600 ms (with Us / when controlled via A1)
Typical release time
< 20 ms (with Us / when controlled via A1)
< 20 ms (with Us / when controlled via S11/S12 and S21/S22)
Delay time range
0.2 s ... 300 s 20 % (can be parameterized)
Rated surge voltage/insulation
Rated control circuit supply voltage U<sub>S</sub>
Rated control supply current I<sub>S</sub>
typ. 155 mA (at U<sub>S</sub>)
Power consumption at U<sub>S</sub>
Inrush current
< 190 mA (with U<sub>s</sub>/I<sub>x </sub>to S12)
< 40 mA (with U<sub>s</sub>/I<sub>x </sub>to S10)
> -60 mA (with U<sub>s</sub>/I<sub>x </sub>to S22)
max. 20 A (≤ 100 ms)
max. 20 A (Δt 100 ms, undelayed contacts)
max. 8 A (delayed contacts)
min. 10 mA
typ. 200 mA (at U<sub>s</sub>)
Filter time
1 ms (in the event of voltage dips at U<sub>s</sub>)
7.5 ms (Test pulse rate)
max. 1.5 ms (Test pulse width of low test pulses)
Protective circuit
Serial protection against polarity reversal; Suppressor diode
Suppressor diode
Description of the input
non-safety-related
safety-related
Input voltage range "1" signal
Max. permissible overall conductor resistance
approx. 22 Ω (Input and start circuits at U<sub>N</sub>)
Current consumption
< 40 mA (with U<sub>s</sub>/I<sub>x </sub>to S10)
< 5 mA (typ. with U<sub>s</sub>/I<sub>x</sub> at S35)
< 50 mA (with U<sub>s</sub>/I<sub>x </sub>to S12)
> -40 mA (with U<sub>s</sub>/I<sub>x </sub>to S22)
typ. 0 mA (with U<sub>s</sub>/I<sub>x </sub>to S34)
Output description
2 N/C contacts parallel, non-safety-related, floating
2 N/O contacts each in series, safety-related, floating
Number of outputs
1 (undelayed)
2 (delayed: 57/58, 67/68)
3 (undelayed: 13/14, 23/24, 33/34)
Switching voltage
max. 250 V AC/DC
max. 250 V AC/DC (Observe the load curve)
min. 5 V AC/DC
Limiting continuous current
Sq. Total current
55 A<sup>2</sup> (observe derating)
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG