Rated control circuit supply voltage US
Rated control supply current IS
Application
Emergency stop
Light grid
Magnetic switch
Safety door
Mechanical service life
10x 10<sup>6</sup> cycles
approx. 10<sup>7</sup> cycles
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Overvoltage category
II, III (See the section “Insulation coordination”)
Typical response time
150 ms (automatic start)
20 ms (manual start)
Maximum power dissipation for nominal condition
Rated surge voltage/insulation
See data sheet, section “Insulation coordination”.
Rated control circuit supply voltage U<sub>S</sub>
Rated control supply current I<sub>S</sub>
Power consumption at U<sub>S</sub>
Protective circuit
Serial protection against polarity reversal
Suppressor diode
Max. permissible overall conductor resistance
50 Ω (Input and start circuits at U<sub>S</sub>)
Output description
2 N/O contacts in series, safety-related, floating
non-safety-related
PNP
Switching voltage
max. 250 V AC/DC
min. 15 V AC/DC
Limiting continuous current
Sq. Total current
72 A<sup>2</sup> (observe derating)
Load/output load voltage output
Voltage
typ. 23 V DC (U<sub>S</sub> - 1 V)
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section, flexible, with ferrule, with plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section, flexible, with ferrule, without plastic sleeve
0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross-section AWG