Rated control circuit supply voltage US
Rated control supply current IS
typ. 94 mA (at U<sub>S</sub>)
Mechanical service life
10x 10<sup>6</sup> cycles
approx. 10<sup>7</sup> cycles
Relay type
Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Typical response time
typ. 150 ms (For U<sub>s </sub>autostart)
typ. 20 ms (For U<sub>s </sub>manual, monitored start)
Typical release time
typ. 20 ms (At Us on demand via sensor circuit)
Recovery time
1 s (following demand of the safety function)
Rated surge voltage/insulation
4 kV / basic isolation (safe isolation, reinforced insulation and 6 kV between input circuit/N/C contacts and enabling current paths).
Rated control circuit supply voltage U<sub>S</sub>
Rated control supply current I<sub>S</sub>
typ. 94 mA (at U<sub>S</sub>)
Power consumption at U<sub>S</sub>
Protective circuit
Serial protection against polarity reversal
Suppressor diode
Output description
2 N/C contacts parallel, non-safety-related, floating
2 N/O contacts in series, safety-related, floating
2 NC in series, non-floating, safety-related
Contact switching type
1 confirmation current path
1 signaling current path
4 enabling current paths
Switching voltage
max. 250 V AC/DC
max. 26.4 V
min. 15 V
min. 15 V AC/DC
Inrush current
max. 3 A
max. 6 A
min. 25 mA
min. 25 mA AC/DC
Switching capacity (360/h cycles)
Switching capacity (3600/h cycles)
Limiting continuous current
Sq. Total current
50 A<sup>2</sup> (observe derating)
Output fuse
10 A gL/gG NEOZED (High demand)
4 A gL/gG (Low demand)
Conductor cross-section rigid
Conductor cross-section flexible
Conductor cross-section AWG
Operating voltage display