Date of last data management
Maximum power dissipation for nominal condition
Nominal input voltage U<sub>N</sub>
Protective circuit
Surge protection; Suppressor diode
Switching point
≤ 1.2 mA (In blocking state)
≥ 2.1 mA (In conductive state)
0 mA ... 0.35 mA (In the event of a wire break)
6.3 mA ... 10 mA (in the event of a short-circuit)
Designation
Alarm output
Signal output
Output nominal voltage
≤ 100 mV (In conductive state)
U<sub>VN</sub> - U<sub>R</sub>;<sub> </sub>in blocking state
U<sub>VN</sub> - U<sub>Res</sub>
Limiting continuous current
Voltage drop at max. limiting continuous current
≤ 1.5 V (U<sub>R</sub>)
≤ 2 V (U<sub>Rest</sub>)
Conductor cross-section rigid
Conductor cross-section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross-section AWG
Tightening torque
0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing))
Flammability rating according to UL 94 (Housing)
Ambient temperature (operation)
Ambient temperature (storage/transport)
Identification
EN 60068-2-60
ISA-S71.04. G3 Harsh Group
Electromagnetic compatibility
Conformance with EMC directive
Assembly note
in rows with zero spacing