Rated actuating voltage UC
Voltage range with reference to UC
Rated actuating current IC
Switching threshold "0" signal in reference to UN
Switching threshold "1" signal in reference to UN
Typical input current at UN
Rated control circuit supply voltage US
Date of last data management
Voltage range with reference to US
Maximum power dissipation for nominal condition
Test voltage (Input/output)
2.5 kV<sub>rms</sub> (50 Hz, 1 min., input/output)
Rated actuating voltage U<sub>C</sub>
Voltage range with reference to U<sub>C</sub>
Rated actuating current I<sub>C</sub>
Switching threshold "0" signal in reference to U<sub>N</sub>
Switching threshold "1" signal in reference to U<sub>N</sub>
Typical input current at U<sub>N</sub>
Operating voltage display
Protective circuit
Reverse polarity protection; Parallel polarity protection diode
Surge protection
Rated control circuit supply voltage U<sub>S</sub>
Voltage range with reference to U<sub>S</sub>
Limiting continuous current
50 mA (a TTL load (Fan out = 1))
Voltage drop at max. limiting continuous current
Output circuit
3-conductor, ground-referenced
Conductor cross-section rigid
Conductor cross-section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross-section AWG
Tightening torque
0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing))