Connection method
Inline data jumper
Spring-cage connection
Transmission speed
500 kbps / 2 Mbps (can be switched)
Process data channel
8 Byte ((Operating mode: SafetyBridge))
Input address area
8 Byte ((Operating mode: SafetyBridge))
Output address area
8 Byte ((Operating mode: SafetyBridge))
Parameter channel (PCP)
0 Byte ((Operating mode: SafetyBridge))
Register length (bus)
8 Byte ((Operating mode: SafetyBridge))
Required parameter data
1 Byte ((Operating mode: SafetyBridge))
Required configuration data
5 Byte ((Operating mode: SafetyBridge))
Number of inputs
4 (for 2-channel assignment)
8 (for 1-channel assignment)
Cable length
max. 200 m (200 m from the clock output to the safe input (total based on forward and return path))
Input voltage
24 V DC (via clock outputs UT1 and UT2 or external supply)
Input voltage range "0" signal
Input voltage range "1" signal
Typical input current per channel
Supply voltage
24 V DC
24 V DC (via voltage jumper)
7.5 V DC (see safety data)
Current draw
max. 180 mA
max. 825 mA (see safety data)
typ. 25 mA (plus current consumption of the inputs when supplied via the clock outputs, plus current consumption of the connected initiators when via through the clock outputs)
Supply voltage range
19.2 V DC ... 30 V DC
19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Test voltage: 5 V supply, incoming remote bus/7.5 V supply (bus logics)
Test voltage: 5 V supply, outgoing remote bus/7.5 V supply (bus logics)
Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O)
Test voltage: 24 V supply (I/O) / functional ground
Conductor cross-section, rigid
Conductor cross-section, flexible
Conductor cross-section AWG
Ambient temperature (operation)
Air pressure (operation)
80 kPa ... 108 kPa (up to 2000 m above sea level)