Typical input current at UN
Date of last data management
Maximum power dissipation for nominal condition
Test voltage (Winding/contact)
3 kV AC (50 Hz, 1 min., winding/contact)
Test voltage (Contact/contact)
3 kV AC (50 Hz, 1 min., contact/contact)
Nominal input voltage U<sub>N</sub>
Input voltage range
18 V DC ... 33.6 V DC (20 °C)
Typical input current at U<sub>N</sub>
Protective circuit
Freewheeling diode; Freewheeling diode
Reverse polarity protection; Polarity protection diode
Operating voltage display
Note regarding the switch contact
Maximum switching voltage
Minimum switching voltage
Limiting continuous current
Interrupting rating (ohmic load) max.
24 W (at 48 V DC)
24 W (at 60 V DC)
31 W (at 110 V DC)
46 W (at 220 V DC)
84 W (at 24 V DC)
875 VA (for 250 V AC)
Conductor cross-section rigid
Conductor cross-section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross-section AWG
Tightening torque
0.45 Nm ... 0.55 Nm (Usually these terminal blocks must be supported during conductor connection (held by one hand, supported on the housing))
Flammability rating according to UL 94 (Housing)
Degree of protection (Relay base)
Ambient temperature (operation)
Ambient temperature (storage/transport)