Notes on operation
In the end application, the applicable safety regulations for overload and short-circuit protection on the connected conductors must be considered.
Note
The max. load current must not be exceeded by the total current of all connected conductors.
Maximum power dissipation for nominal condition
Number of connections per level
Connection method
Push-in connection
Screw connection
Connection in acc. with standard
Conductor cross-section rigid
0.5 mm² ... 16 mm²
1 mm² ... 16 mm²
1.5 mm² ... 50 mm²
Cross section AWG
14 ... 2 (converted acc. to IEC)
20 ... 6 (converted acc. to IEC)
Conductor cross-section flexible
0.5 mm² ... 10 mm²
1.5 mm² ... 35 mm²
Conductor cross-section, flexible [AWG]
14 ... 2 (converted acc. to IEC)
20 ... 8 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
0.5 mm² ... 10 mm²
1.5 mm² ... 35 mm²
4 mm² ... 10 mm²
Flexible conductor cross-section (ferrule with plastic sleeve)
0.5 mm² ... 10 mm²
1.5 mm² ... 35 mm²
2.5 mm² ... 10 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
1.5 mm² ... 10 mm²
1.5 mm² ... 4 mm²
Maximum load current
101 A (The maximum load current must not be exceeded by the total current of all connected conductors.)
57 A
Internal cylindrical gage
2 conductors with same cross section, rigid
2 conductors with the same cross-section AWG rigid
16 ... 6 (converted acc. to IEC)
2 conductors with same cross section, flexible
2 conductors with the same cross-section AWG flexible
16 ... 8 (converted acc. to IEC)
Flammability rating according to UL 94
Insulating material group
Static insulating material application in cold
Relative insulation material temperature index (Elec., UL 746 B)
Fire protection for rail vehicles (DIN EN 45545-2) R22
Fire protection for rail vehicles (DIN EN 45545-2) R23
Fire protection for rail vehicles (DIN EN 45545-2) R24
Fire protection for rail vehicles (DIN EN 45545-2) R26
Surface flammability NFPA 130 (ASTM E 162)
Specific optical density of smoke NFPA 130 (ASTM E 662)
Smoke gas toxicity NFPA 130 (SMP 800C)