General
<b>Assembly instructions:</b><br/>For secure fastening of the neutral busbar, supports must be set at the beginning and end of each terminal strip as well as every 20 cm on longer terminal strips.
Product type
Installation terminal block
Maximum power dissipation for nominal condition
Current carrying capacity of the neutral busbar
Number of connections per level
Tightening torque disconnect slide
Connection method
Special and hybrid connection
Connection in acc. with standard
Conductor cross-section rigid
Cross section AWG
12 ... 4 (converted acc. to IEC)
Conductor cross-section flexible
Conductor cross-section, flexible [AWG]
10 ... 6 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve)
Flexible conductor cross-section (ferrule with plastic sleeve)
2 conductors with same cross section, rigid
2 conductors with same cross section, flexible
2 conductors with same cross section, flexible, with ferrule without plastic sleeve
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve
Maximum load current
90 A (with 25 mm² conductor cross-section)
Flammability rating according to UL 94
Insulating material group
Static insulating material application in cold
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))
Relative insulation material temperature index (Elec., UL 746 B)
Requirement temperature-rise test
Increase in temperature ≤ 45 K
Short-time withstand current 16 mm²